[15-Nov-2025 19:24:54 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/DeniedRedirect.php on line 23
[15-Nov-2025 19:56:19 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Shortcode.php on line 20
[15-Nov-2025 20:06:29 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_RequestTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Multisite.php on line 22
[15-Nov-2025 20:22:36 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/LoginRedirect.php on line 22
[15-Nov-2025 20:39:32 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_RequestTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/SecureLogin.php on line 24
[15-Nov-2025 21:11:52 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Welcome.php on line 20
[15-Nov-2025 21:12:36 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_SingletonTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Core.php on line 24
[15-Nov-2025 21:16:32 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Route.php on line 22
[15-Nov-2025 21:29:02 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/LogoutRedirect.php on line 24
[15-Nov-2025 23:00:13 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_RequestTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Content.php on line 27
[15-Nov-2025 23:21:58 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Capability.php on line 18
[15-Nov-2025 23:27:44 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/AdminMenu.php on line 21
[15-Nov-2025 23:44:33 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Jwt.php on line 25
[15-Nov-2025 23:47:29 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/UserLevelFilter.php on line 21
[15-Nov-2025 23:49:20 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_RequestTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Uri.php on line 24
[15-Nov-2025 23:52:23 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/NotFoundRedirect.php on line 22
[16-Nov-2025 00:01:25 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Metabox.php on line 22
[16-Nov-2025 00:01:39 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_RequestTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/Toolbar.php on line 21
[16-Nov-2025 00:16:44 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/AccessPolicy.php on line 28
[16-Nov-2025 11:46:44 UTC] PHP Fatal error: Trait 'AAM_Core_Contract_ServiceTrait' not found in /home/prismhea/public_html/tryversion/wp-content/plugins/advanced-access-manager/application/Service/ExtendedCapabilities.php on line 24
The most practical to use and a must have for every household. Relieves headaches, eases pain, helps reduce inflammation caused by strains, sprains, etc. Store these in the freezer for cold therapy , access them when you need them. The special technology keeps packs soft and flexible allowing the packs to conform to the painful body part. Warm the same pack in the microwave to help with muscle relaxation and promote healing.
The packs are “Frost Free” and gentle on skin. The light blue soft surface the instant therapeutic hot / cold to the affected body part while the plush dark blue surface slowly provides the hot / cold to the painful area soothing the body part. It is gentle on the skin and does not need a towel for most people(*)
These CorPaks are made of more nontoxic, biodegradable fill than traditional packs to retain cold / heat longer. The pack will maintain the therapeutic temperature for the recommended 20 minutes.
When not in use it is conveniently stored in the refrigerator.
It is latex free, REUSABLE and MADE IN USA!!
PLEASE NOTE: (*) people with nephropathy, skin sensitivity issues and other conditions may need to use a towel to protect their skin. Please read the labels and individually assess appropriateness to your specific body type.
Instruction of Use:
Overheating may cause injury or cause pack to rupture and leak. Discard pack if leak develops. Use hot or cold. Store in freezer. Heat in microwave for 30 seconds on high, then at 10 second intervals until desired temperature is reached. Knead after each heating.
The Security Pole makes it easy to stand from a couch, bed, or toilet. It’s tension mounted, so you can place it anywhere in the home without any screws or bolts. And like all our products, it blends in with the look of your home to increase your independence without intruding on the comforting feeling of your home.
Assembly Instructions: Click Here
]]>Specifications
Installation Video
]]>
Benefits & Features:
Variety of Bed and Chair Alarm Packages:
Package includes (each individual package may be slightly different):
One long term bed sensor pad — choose your bed pad size: 10″ x 30″ bed pad (for a patient weighing 120 lbs. or MORE) or a 20″ x 30″ bed pad (for a patient weighing LESS than 120 lbs, +$10)*.
One long term chair sensor pad, 10” x 15”.
One wireless fall monitor, (or if you do not want to have to switch the monitor back and forth between the two pads, you can add a second monitor from the Product Options above (+$74.95), and then each pad will have a dedicated unit).
One caregiver pager.
One protective pager cover.
Optional AC adapters (+$9.95/ea) are available for use with the wireless fall monitor. They will reduce the amount of batteries used over time. An AC adapter is completely optional and the monitor will work efficiently with batteries.
Our high quality sensor pads are sealed for incontinence protection. Our bed pads feature a safety breakaway cord.
Wireless fall monitor features an adjustable volume that is set on silent by default, but can be adjusted to issue an alarm to remind the patient to sit back down and wait for assistance.
Caregiver pager features volume and language/tone options, a silent vibration mode, an LCD screen which lights up when the alert is received, and a belt clip which converts into a built-in stand.
To use, simply place 3 AA batteries, (not included), in the monitor or connect an optional AC adapter. Place 2 AA batteries inside the pager, (not included). Connect the pad to be used to the monitor, using the simple phone jack type connection at the end of the pad cord. (If you are only ordering one wireless fall monitor, when your patient moves from bed to chair, you simply disconnect one pad and connect the monitor to the other one). Place the bed pad under the fitted sheet, across the upper back area of your patient. For lighter-weight patients, we recommend instead placing the pad across the buttock/hip area. Place the chair pad in the desired chair. When the patient sits up or tries to stand, the monitor box will send a (default silent) signal to the pager, which will then alert you. Reset the system by pressing the ‘Reset’ button on the front of the monitor box. The system will also reset itself if the patient sits back down on the pad.
*Using this system with certain types of mattresses or cushions, such as memory foam, Tempur-Pedic®, air pressure alternating, gel cushions, or other ones designed to distribute pressure away from the body, can cause false alarm responses. When sensor pads are used on these surfaces, the mattresses/cushions distribute body pressure away from the pads, which can cause the pad to think that the patient is no longer upon it, triggering an alarm. Conversely, these mattresses/cushions can also cause delayed alarm issues. Our 20″ x 30″ sensor pads are more effective when used with these types of mattresses, so we recommend purchasing the larger pad, regardless of patient weight.
Always test before use.One year manufacturer’s warranty on the bed pad, chair pad, and wireless fall monitor. 6 month warranty on the pager. Long term pads are expected to last a year and are warrantied as such. The pads should be replaced after that time.
To order a new replacement bed / chair sensor pad, please call 904-880-9900 X 112 during regular business hours or complete the Contact Us Form to order Replacement Standard Sensor Pads.
]]>Bariatric Bath Bench Without Back (PPB402-1) With Back (PPB401-1)
]]>